I-Tech Company WBX-6200F-V user manual Initializing the DMA controller, performing the keyboard

Page 45

 

Initializing the DMA controller, performing the keyboard

D1

controller BAT test, starting memory refresh, and going to 4GB

 

flat mode.

D3

To start memory sizing.

D4

Returning to real mode. Executing any OEM patches and setting

the stack next.

 

 

Passing control to the uncompressed code in shadow RAM at

D5

E000:0000h.

The INIT code is copied to segment 0 and control will be

 

 

transferred to segment 0.

 

Control is in segment 0. Next, checking if <Ctrl><Home> was

 

pressed and verifying the system BIOS checksum.

D6

If either <Ctrl><Home> was pressed or the system BIOS

 

checksum is bad, next will go to checkpoint code E0h.

 

Otherwise, going to checkpoint code D7h.

D7

To pass control to interface module.

D8

Main BIOS runtime code is to be decompressed.

D9

Passing control to the main system BIOS in shadow RAM next.

Bootblock Recovery Codes — The bootblock recovery checkpoint hex codes are listed in order of execution:

 

Code

 

 

Description

 

 

 

 

The onboard floppy controller if available is initialized. Next,

 

E0

beginning the

 

 

 

base 512KB memory test.

 

E1

Initializing the interrupt vector table next.

 

E2

Initializing the DMA and Interrupt controllers next.

 

Code

 

 

Description

 

 

E6

Enabling the floppy drive controller and Timer IRQs. Enabling

 

internal cache memory.

 

 

 

 

ED

Initializing the floppy drive.

 

EE

Start looking for a diskette in drive A: and read first sector of the

 

diskette.

 

 

 

 

EF

A read error occurred while reading the floppy drive in drive A: .

 

F0

Next, searching for the AMIBOOT.ROM file in the root directory.

 

F1

The AMIBOOT.ROM file is not in the root directory.

 

F2

Next, reading and analyzing the floppy diskette FAT to find the

 

clusters occupied by the AMIBOOT.ROM file.

 

 

 

 

F3

Start reading AMIBOOT.ROM file, cluster by cluster.

 

F4

The AMIBOOT.ROM file is not the correct size.

 

F5

Next, disabling internal cache memory.

 

FB

Next, detecting the type of Flash ROM.

 

FC

Erasing the Flash ROM.

 

FD

Programming the Flash ROM

36

Image 45
Contents WBX-6200F-V Technology Corp Copyright NoticeSafety Precautions Page Acknowledgments (This page does not contain any information) Table of Contents Appendix B. System Assembly Reference How to Use This Manual Introduction Features„ Bios System Specification Parts SpecificationsCPU CF interface Pcmcia interface System ViewConnectors Unpacking Getting Started Setting Up the SystemMethod 1 Use the Ethernet Installing System SoftwareMethod 2 Use the COM or Parallel Port Method 3 Use a External CD-ROMInstalling the Drivers Entering Setup Bios Setup InformationKeys to navigate within setup menu Functions Standard Cmos Setup Menu Main Menu„ Menu selections Options Description Advanced Cmos Setup Failsafe Other Options Default Bios Setup ItemsPage Bios Setup Advanced Chipset SetupOther Options Items Default Sdram CAS#Other Default Options IRQ13 IRQ11IRQ14 IRQ15Bios Setup Optimal Failsafe Other Items Default Options PCI / Plug and Play SetupCRT LCD CRT+LCD CRT+TV DVI DVI+CRT Ntsc PAL, PalmPeripheral Setup Defaults Failsafe Other Default OptionsEPP, EPP+ECP Hardware Monitor Setup Defaults Advanced Cmos Setup MenuQuick Boot 1st Boot Device / 2nd Boot Device / 3rd Boot DeviceBoot Up Num-Lock Try Other Boot DeviceUSB FDD, USB CDROM, USB HDD, USB RMD-FDD, USB RMD-HDD A.R.T for Hard DisksBoot To OS/2 Password CheckSystem Keyboard Primary DisplaySystem Bios Cacheable Advanced Chipset Setup MenuConfigure Sdram Timing by SPD L2 CacheSdram Frequency Sdram Command RateSdram CAS# Latency Sdram Bank InterleaveWDT Timer Control HDD Udma Mode ControlUSB Controller USB Device Legacy SupportPower Management Setup Menu Suspend Time out Minute Standby Time out MinuteThrottle Slow Clock Ratio Display ActivityRestore On AC/Power Loss Power Button FunctionResume On RTC Alarm RTC Alarm Date / Hour/ Minute / SecondPCI/Plug and Play Setup Plug and Play Aware O/SClear Nvram Peripheral Setup FIR IRQ Select On Board FIR PortFIR DMA1 Select On Board Parallel PortEPP Parallel Port ModeECP EPP VersionHardware Monitor Setup Code Description Bios Post Check Point ListInitializing the DMA controller, performing the keyboard Uncompressed Initialization Codes The following runtime BAT command to the keyboard controllerPost Soft reset next Bios Post Coprocessor test Flash Bios UtilityPage Jumpers Location and list Appendix A. Jumper Setting Connectors List of CPU BoardTable Jumper Setting Example Jumper SettingJumper List Notation Description IllustrationTouch Screen configuration JP2 RTC Cmos Clear Jumper Setting JP1LCD Panel Power select JP4 DVI Port configuration JP5Connectors Location Connector DefinitionsPage COM1 Connectors ListCN2 CN1CN3 KB/MS MINI-DINSignal Description HDD Power Connector Reset Button J1Gpio Connector J2 Pin head on MB PIN No Signal Description Internal VGA Connector J3-optional PIN No Name DescriptionInverter power connector J7 PIN No Name Description Touch Pad Interface J8 PIN No Signal DescriptionPIN No Name Description 3VAUX INTB# INTA#CLK RST# REQ# GNT#PIN No Signal Description CPU Fan Connector J10PCI Slot J11 PIN No Signal Description INTR#D RESET#INTR#A INTR#B INTR#C REQ#3Power & HDD LED J13 PIN No Name Description Power Bottom J12 PIN No Name DescriptionVGA connector J15 PIN No Name Description LED State Power HDD Active S1, S3 Off GreenSystem Fan Connector J18 PIN No Name RedAMP OUTR+ AMP OUTL+ AMP Outr AMP Outl DVI Port J21 PIN No Signal DescriptionPCIRST# Dvihsync Dvivsync Dviclk Tvclkr Dvidet SPCLK2 SPD2Power Jack Connector CN1 PIN No Name Description Internal USB Port J24 PIN No NameAudio Jack Line-out, Line-in, Micro CN2 422 PIN No Signal Description COM2 Pin Definition CN4 RS-232 PIN No Signal Description485 PIN No Signal Description KB/MS 6 pin MINI-DIN female CN3 PIN No Name DescriptionUSB a Port 2/3 CN7 PIN No Name Description RS-232 PIN No Signal DescriptionUSB a Port 0/1 CN8 PIN No Name Description TTL Interface pin assignment CN10LVDS1 Panel Connector CN11/CN12 PIN No Signal Description CN 12 for Lvds second Channel PIN No. Signal DescriptionCkin CKIN+ Primary IDE Connector IDE1 PIN No Signal Description Secondary IDE Connector IDE2 PIN No Signal Description Internal LPT Port LPT PIN No Signal Description RJ45 LAN connector LAN1 PIN No Name DescriptionTX+ RX+VCC GND HDD Power Connector PJ1 PIN No NameCF interface LEDGpio Bracket Pcmcia / CPU Bottom Bracket CPU-A

WBX-6200F-V specifications

The I-Tech Company has made a significant impact in the technological landscape with its innovative product, the WBX-6200F-V. This advanced device is designed for various applications, including industrial automation, telecommunications, and smart infrastructure, setting a new standard for performance and reliability.

At its core, the WBX-6200F-V showcases a powerful processing unit that leverages multi-core architecture to enhance computational efficiency. This feature allows for multitasking capabilities, enabling it to handle demanding applications seamlessly. The cutting-edge processing technology ensures that the device operates smoothly under various loads, making it ideal for both real-time and batch processing tasks.

One of the standout characteristics of the WBX-6200F-V is its robust connectivity options. It supports multiple communication protocols, including Ethernet, Wi-Fi, and Bluetooth, which facilitate seamless integration into existing networks and systems. This flexibility enables users to deploy the device in diverse environments, making it a versatile solution for IoT (Internet of Things) applications.

In addition to connectivity, the WBX-6200F-V excels in data processing capabilities. With built-in cloud compatibility, users can easily store and analyze data remotely. This feature is crucial for industries that rely on big data analytics and require real-time insights for decision-making. The integration with cloud services allows for efficient data management and enhances collaboration between teams, regardless of their geographical locations.

Furthermore, the WBX-6200F-V is equipped with state-of-the-art security features to protect sensitive information. It incorporates advanced encryption protocols and secure access controls, ensuring that data transmitted over networks remains safe from unauthorized access and potential cyber threats. This focus on security is particularly important in industries that handle confidential information.

Moreover, the device is designed to be energy-efficient, featuring low power consumption without sacrificing performance. This characteristic not only reduces operational costs but also aligns with global sustainability initiatives.

The I-Tech Company WBX-6200F-V stands out for its user-friendly interface, making it accessible for a wide range of users. The intuitive design simplifies the setup process and provides easy access to various features, enabling businesses to leverage its capabilities effectively.

In conclusion, the I-Tech WBX-6200F-V combines exceptional processing power, versatile connectivity, robust security, and energy efficiency, making it a top choice for industries seeking reliable technological solutions. Its commitment to innovation positions I-Tech as a leader in the market, paving the way for future advancements in technology.