Connecting to Your PC
3
Connecting to
Your PC
Macintosh
1 Move the icon of the recorder's drive displayed on desktop to trash box by drag and drop.
2 Disconnect the USB cable.
.................................................................................................................................................................
Notes
•NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will be destroyed.
•Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.
•Be sure that you connect the USB cable either directly to the USB port on your PC or the
•Be sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.
•Release the HOLD switch.
Connecting to your PC using the cradle
Place the recorder on the cradle
1 Insert end A of the USB cable to your PC's USB port or USB hub.
2 Connect the end b of the USB cable to the cradle.
3 Make sure that the recorder is off, and place it in the cradle.
1 Set the recorder vertically.
2
1
36