Hold
Setting the HOLD switch to the HOLD position. If you set the recorder to HOLD status by sliding the HOLD switch in the direction of the arrow, the current conditions will be preserved, and all buttons and switches except the HOLD switch will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket.
Remember to reset the HOLD switch when using the recorder.
Running state when HOLD is set
1: State of the recorder, 2: HOLD of the recorder, 3: HOLD of the remote controller, 4: Button
operation on the recorder, 5: Button operation on remote controller
5
Hold
1 |
| 2 | 3 | 4 | ||
|
| On |
| Not |
| The display goes out after “HOLD” |
|
|
|
| connected |
| blinks for 2 seconds.*1 |
|
| On |
| Off |
| The display goes out after “HOLD” |
STOPS |
|
|
|
| blinks for 2 seconds.*1 | |
|
|
|
|
|
|
|
|
| Off |
| On |
| Normal operation |
|
|
|
|
|
|
|
|
| On |
| Not |
| If HOLD is applied during playback |
|
|
|
| connected |
| (recording), operation is disabled with the |
|
|
|
|
|
| playback (recording) state unchanged.*2 |
|
| On |
| Off |
| If HOLD is applied during playback |
Running |
|
|
|
| (recording), operation is disabled with the | |
|
|
|
|
|
| playback (recording) state unchanged.*2 |
|
| Off |
| On |
| Normal operation |
5
Normal operation. If the recorder stops after button operation, the display goes out 20 seconds later.
Button operation on the remote controller is invalid.
Normal operation. If the recorder stops after button operation, the display goes out 20 seconds later.
Button operation on the remote controller is invalid. However, the REC lamp is lit while the recorder is recording.
*1: Pressing any button makes clock display blink for 2 seconds but the recorder does not start.
*2: The recorder stops when playback completes or recording terminates due to no memory space.
Note
The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play the file associated with the alarm when you press any button.
54