Humax ND-1000C manual Front Panel, Rear Panel, Smart Card Slot Slot for a smart card, Ch-/+

1.2 Front Panel

1.SMART CARD SLOT Slot for a smart card.

The Smart Card is to be placed in the slot with the arrow “This way up” facing upwards (i.e. Chip-side upwards).

NOTE: THE CARD IS TO BE INSERTED GENTLY TILL IT STOPS AND REMAINS APPROX. 1 CM OUTSIDE.

2.CH-/+

Moves the TV/Radio channel up/down.

3.STANDBY Button

Switches between Operation and Standby modes.

While watching the analog Fee-To-Air Channels, the Set-Top Box should be in the STANDBY mode.

NOTE: IF POWER TO THE STB IS SWITCHED OFF, YOU CANNOT VIEW THE ANALOG FREE-TO-AIR CHANNELS.

1.3 Rear Panel

1.CABLE IN

Connect the incoming Cable-TV signal to the CABLE IN jack on the Set-Top Box.

2.CABLE OUT

Connect the outgoing cable from CABLE OUT to the TV set.

3.AUDIO R/L

Connect the AUDIO R to the TV AUDIO IN and AUDIO L to the TV AUDIO IN using RCA-RCA cord.

4.VIDEO

Connect the VIDEO to your VIDEO IN of TV / VCR using RCA-RCA cord.

11