Humax ND-1000C manual Powering On, Configuration of the Set-Top Box

INPUT

•Connect your CATV line to the CABLE IN socket on the Set-Top Box for receiving cable services.

OUTPUT

•RF Output

Connect a cable from the CABLE OUT connector of the Cable Set-Top Box to the RF (Tuner) input of the Television using a F to TV cord.

•Base-band Output

For best picture quality, it is recommended to use the A / V outputs of the Cable Set-Top Box.

•RCA A / V Cable are connected as in the figure above Please note the polarity for Left & Right audio channel is correctly connected.

2.2 Powering On

1.Connect the power cord of the Set-Top Box to a wall outlet.

2.Power on by pressing STANDBY( )button on the Remote Control or the STANDBY button on the front of the Set-Top Box.

2.3 Configuration of the Set-Top Box

Since the process of configuring the Set-Top Box involves certain Network parameters, you are requested to get the same carried out by your Cable Operator / nearest Area Office personnel.

15