Gefen EXT-DVI-2-VGAN user manual Connecting and Operating the DVI to VGA Converter

Page 9

CONNECTING AND OPERATING THE DVI TO VGA CONVERTER

How to Connect the DVI to VGA Converter

1.Connect a DVI source to the DVI In connector using the provided DVI cable. NOTE: The DVI to VGA Converter only supports DVI-D sources.

2.Connect a VGA cable between the VGA monitor and the DVI to VGA Converter.

3.Connect the 5V DC power supply to the DVI to VGA Converter and connect the included AC power cord to an available electrical outlet. The LED on the DVI to VGA Converter will turn bright red indicating that the unit is powered.

4.Power on the VGA monitor and the DVI source.

Wiring Diagram for the DVI to VGA Converter

Image 9

Contents DVI to VGA Converter Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Introduction Gefen Gefen DVI to VGA ConverterHow It Works Operation Notes Features FeaturesPackage Includes Front Back Panel LayoutPanel Descriptions Power IndicatorConnecting and Operating the DVI to VGA Converter How to Connect the DVI to VGA ConverterWiring Diagram for the DVI to VGA Converter Edid Modes Edid ManagementVideo Data Block Internal Edid Speciﬁcations5V DC SpecificationsProduct Registration WarrantyPage Nordhoff St., Chatsworth CA