Guide of Main Menu
E16
Time Setting
You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup mode and Sleep Time(standby mode) can be set. When a VCR is connected, recording can be automatically done according to Wakeup/Sleep Time Setting.
Current Time
To set the Current Time, enter the Offset value using the standardised information of current service area.
The time setting will be used as the standardised time for the
Time Offset
Current Time is based on TDT(Time and Data Table) at the stream of the current service.
Timer
You can select nine kinds of Timer like 1, 2.......8 and Disabled.
If you select “Disabled”, then the other timers will not work. Press the 
button at timer option to display the Timer table. The Timer determines the on/off time and can also be used for VCR recording.
Timer Mode
Wakeup/Sleep timer determines the Timer Mode.
• | Once | : The timer programming is applied only once. |
• | Daily | : The timer recording is applied everyday repeatedly. |
• | Weekly : The timer recording is applied weekly. | |
|
| (Set one day in a week). |
Use the | buttons to select the type of timer programming. | |
Wakeup Time
Select the time when STB is turned on.
Use the Numeric buttons(0~9) on the remote control unit to enter your Wakeup Time.
Wakeup Service No.
Use the 
buttons to set the service number provided for the set Wakeup Time.
Use the TV/Radio( 
) button on the remote control unit to toggle TV/Radio service.
Service Name
The Service Name that has been determined by the Wakeup Service No. will be shown.
Sleep Time
Depending on Time Setting, select the time when STB is turned off.