Humax CI-5100C manual E17, Output Setting, UHF Tuning

A/V Output Setting

Video Output(CVBS/S-Video/RGB)

Set the video mode for the TV SCART output.

Audio Output

Set the audio mode which is output from the TV SCART and RCA/Cinch Jack. (Stereo/Mono)

Dolby Digital

lf Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service.

Screen Mode

Select the aspect ratio of TV which is connected to STB(4:3 or 16:9).

Display Format

Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9,

STB will display in Letter-box or Centre mode as selected. When your TV set is 16:9 and video source is 4:3,

STB will display in the Pillar-box or Full mode as selected.

UHF Tuning

You select the STB output by using the UHF channel.

Channel

Select an UHF channel. The range of channels and frequency value are different for each PAL Standard:

PAL I/G for Europe : CH21 ~ CH69

PAL B for Europe/Australia : CH28 ~ CH69

PAL D for China	: CH13 ~ CH62
PAL K for Russia	: CH21 ~ CH69

PAL Standard

Select a PAL Standard according to the above range of channels.

Offset

Adjust the fine tuning value. The Offset ranges from -4 to +4 and each Offset represents 1MHz.

E17