Gateway CG3100, CG3000 manual Button Description

Wireless Cable Voice Gateway CG3000/CG3100 User Manual

You can use the LEDs to verify status and connections. The following table lists and describes each LED and button on the front panel of the gateway.

Table 1-1. LED and Front Panel Button Descriptions

LED	Description
	• Solid green. Power is supplied to the cable modem.
	• Off. No power.
Power
	• Solid green. The unit is synchronized, and all four channels are in use (channel
	bonding).
Downstream	• Blinking. The unit is scanning for a downstream DOCSIS channel.
	• Off. No downstream channels are locked.
	• Solid green. The unit is synchronized, and all four channels are in use (channel
	bonding).
Upstream	• Blinking. The unit is scanning for an upstream channel.
	• Off. No upstream channels are locked.
	• Solid green. The cable modem is online.
	• Blinking. The cable modem is synchronizing with the cable provider’s CMTS.
Internet	• Off. The cable modem is offline.
	• Green indicates 1,000 Mbps. Amber indicates 10/100 Mbps.
	• Solid. An Ethernet device is connected and powered on.
LAN (Ethernet)	• Blinking. Data is being transmitted or received on the Ethernet port.
	• Off. No Ethernet device is detected on the Ethernet port.
Voice Ports	• Solid green. Registered with the Call Agent.
(1 and 2)	• Blinking. There is an active call.
	• Slow blink. Phone is “on-hook,” registration with Call Agent is in progress.
	• Off. No phones are connected to the voice port.

Button	Description
	Turn the wireless radio in the gateway on and off. The wireless radio is on by default. The
	LED located below this button indicates if the wireless radio is on or off.
Wireless
On/Off
	Pushing this button opens a 2-minute window for the gateway to connect with other WPS-
	enabled devices. For more information, about using the WPS method to implement secu-
Push 'N'	rity, see the Wireless Cable Voice Gateway CG3000/CG3100 User Manual
Connect (WPS)
1-2	Connecting the Gateway

v1.0, July 2009