Gateway CG3000, CG3100 manual Click Start WPS or push

Wireless Cable Voice Gateway CG3000/CG3100 User Manual

2.In the main menu, select Wireless Settings. Scroll down to the WPS section of the screen:

WPS automatically selects WPA-PSK

if security is disabled.

Figure 2-4

Note: WPS is incompatible with WEP security. If WEP is configured in the gateway then WPS cannot be enabled.

3.Select Enable in the WPS Config field and click Apply.

4.In the WPS Method field, select Push Button.

5. Click Start WPS or push the WPS button on the front panel of the gateway.

•The WPS LED on the front of the gateway begins to blink.

•The gateway tries to communicate with the client for 2 minutes.

•If the Security Option in the Wireless Settings screen was set to Disabled, the gateway automatically changes it to WPA-PSK (including a PSK security password).

6.Go to the client wireless computer, and run a WPS configuration utility. Follow the utility’s instructions to click a WPS button.

When the gateway adds the WPS client, it sends the SSID and WPA-PSK or WPA2-PSK configuration to the client.

Wireless Configuration 2-11

v1.0, July 2009