Fortec FSHD-4700 Antenna Setup, N B F r e q, S E q C 1, DiSEqC1.1, 22K, Polarity, Motor T ype

2.3 Antenna Setup

Part A : Fixed

Suppose that you have selected Fixed Antenna in the Antenna Connection window.

1.Satellite: All selected satellites in the satellite list are displayed in this item.

Press		keys to		select the satellite in circle. Or
press	OK	key to pop up the drop-down				list, then
select	the desired		satellite in the		list and press OK
key to con￿rm.
2 . L N B F r e q ,			T r a n s p o n d e r ,		D i S E q C 1 . 0 ,
DiSEqC1.1:		The same		operation as the above.
3. 22K, Polarity:			You can press		keys	to select in circle.
Part B : Motor
Suppose that you			have selected Motor Antenna in

the Antenna Connection window.

1.LNB T ype: Select the proper LNB type.

2. Motor T ype:	Select between DiSEqC1.2 and
USALS. If you	select DiSEqC1.2, the	following
Local Longitude and Local Latitude items		will turn
grey.

3.Delete All: Press OK key to pop up the dialogue "Are you sure to clear set satellite position of this tuner?". Press OK key at the Yes button to clear all the memories about the position of the satellites that are connected to the current tuner.

4.Motor Setting: Press OK key to the Motor Setting window.

Satellite: Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to con￿rm.

Transponder: The same operation as the above.