Fortec FSHD-4700 Position No, West Save East, Recalculation, Limit Setup, Go to Reference

Position No., &		Save: The range is from 0 to 63. "0" delegates the original					position.
You can select the proper value when you has rotated the antenna.
Go to X:	Press	OK	key to pop up the drop-down list, select the			proper position
(reference or from 1to 63) to realize the selected position.
West <Save> East:			Press	key to turn west, while press	key to		turn east.
Press OK	key	to pop up		the dialogue "Are you sure to change		this	satellite's
position?". Press		OK key at the Yes button to save the current position, or press OK
key at the No button to cancel the operation.
Recalculation:		Press OK		key to pop up the dialogue "Are you sure		to change this
satellite's position?". Press				OK key at the Yes button to recalculation.

5.Limit Setup: Press OK key to pop up the Limit Setup window.

Limit Setup:		Press		keys to	switch among
Disable Limit, East			Limit and W est Limit.
Limit	Setup:	Move cursor to			the Limit Setup
button. You can press				key to turn west , or
press	key to	turn east.
Go to Reference:			Press	OK key to go to reference.

If you select Disable Limit in the above Limit Setup item, this button will turn grey.

6. If select USALS, Delete All item will turn grey.

Local Longitude, Local	Latitude: Press
keys to switch between West and East, or press
keys to switch	between North and South.

Press OK key to enter into the editing mode. Use numeric keys (0-9)to input the longitude or latitude, press MENU key or EXIT key to exit. The range of the longitude is from 0 to 180,while the range of the latitude is from 0 to 90. If the inputted value is not in this range, system will pop up a dialogue "Out of Range" when you exit from this window. You can press OK key to close this dialogue.