Fortec FSHD-4700 manual Factory Setting, Conditional Access, About CA Info, Change PIN

4.2 Factory Setting

Press OK key to enter into the Factory Setting window.

Select Yes button and press OK key to return to the factory setting. All searched channels and set information will be erased.

Select No button and press OK	key to cancel this
operation, or press MENU or EXIT	key to cancel and
exit.

4.3 Conditional Access

Insert the smart card with the golden chip facing down.

Push the smart card into the CA slot. Only a fewCA Slot millimetres of the card should be visible outside the slot.

Select Conditional Access item and press OK key, then you will enter into its sub-menu which consists four

items of About CA Info, Change PIN, Change Signature PIN, Maturity Level.

4.3.1 About CA Info

In About CA Info sub-menu, you can know the basic information about this conditional access such as Card Status, CAS System ID, Interface Version, Card Number, Number of sessions, Country Indicator, and Maturity Level.

4.3.2 Change PIN

Changes PIN window is designed for changing the smart card's PIN, which is required if you want change the maturity level settings.

In order to change the PIN, you must know the current PIN also called the old PIN. Input the new PIN and twice the PIN (New PIN and Con￿rm PIN must be the same) your want to set. Move cursor to OK button and press OK key, and then system will pop up a dialogue informing you the changing result.

Note that the PIN can only constructed with Arabic numerals.

4.3.3 Change Signature PIN

Do the same way as the above Change PIN.

Note: The signature PIN will be locked after the three erroneous attempts to enter the correct PIN. If locked, please call the dealer for help.