Menu Operations
2Cascades Port1 / 2Cascades Port2 / 2Cascades Port3 / 2Cascades Port4 / 2Cascades Port5 / 2Cascades Port6 / 2Cascades Port7 / 2Cascades Port8 / 2Cascades Port9 / 2Cascades Port10 / 2Cascades Port11 / 2Cascades Port12 / 2Cascades Port13 / 2Cascades Port14 / 2Cascades Port15 / 2Cascades Port16.
Positioner: Press [Volume Up/Down] to select between “None / DiSEqC1.2 / USALS”.
Toneburst: Press [Volume Up/Down] to switch this function “On” or “Off”.
Polarity: Press [Volume Up/Down] to switch between “Auto / H / V/ Off”.
0/12V: Use [Volume Up/Down] to switch “ON” and “Off”.
3.DiSEqC1.0: Use [Volume Up/Down] to switch the options of DiSEqC1.0 switches. Between Disable / LNB1 / LNB2 / LNB3 / LNB4.
4.TP Index: Use [Volume Up/Down] to select the desired transponder.
5.FTA Only: Press [Volume Up/Down] to select to scan only free channels or even scrambled channels. If you select “Yes” it will scan free channels only.
6.Scan Channel: Press [Volume Up/Down] to select to scan TV + radio channels, or just TV channels or just radio channels.
7.Scan Mode: You can select “Preset Scan” or “Network Scan” to scan preset transponders or network transponders of the selected satellite.
8.Search: Press [OK] to start scanning. In the lower part of the window the progress of scanning and the found channels are displayed.
4.2 Single Search
After selecting “Single Search” you will see a window like beside:
1.In the “Satellite” item press [Volume Up/Down] to select the satellite which you want to scan or press [OK] to open the “satellite list” to select directly.
2In the “FTA Only” item, press [Volume Up/Down] to select to scan only free channels or even scrambled channels.
If you select “Yes” it will scan free channels only.
3In “Scan Channel” item, press [Volume Up/Down] to select to scan TV + radio channels, or just TV channels or just radio channels.
4In “Scan Mode” item you can select “Preset Scan” or “Network Scan” to scan preset transponders or network transponders of the selected satellite.
5Move the highlight to “Search” and press [OK] button to start scanning. Bars are showing the progress of the channel scanning in the lower part of the window and the found channels are listed.
6You can stop the scan with [MENU] button.
20