Menu Operations
4.3 Multi Search
When you enter the “Multi Search” menu a window like the one beside will open.
1.On “Satellite” item press [OK] to open the satellite list. Then press [Channel Up/Down] to move the highlight and press [OK] to mark/unmark and [MENU] to finish the selection. You can select several satellites in this menu. The system will use DiSEqC1.0/1.1, DiSEqC1.2 and USALS functions to search the marked satellites and scan channels.
2.On “FTA Only” item, press [Volume Up/Down] to select scanning of all channels or just scanning of free channels. If you select “Yes” it will scan free channels only.
3.On “Scan Channel” item, press [Volume Up/Down] to select the scanning range from TV + radio channels, only TV channels or only radio channels.
4.On “Scan Mode” item, you can select “Preset Scan” or “Network Scan” to scan preset transponders or network transponders of the selected satellite.
5.Select “Search” and press [OK] to start scanning. In the lower part of the window the progress of scanning and the found channels are displayed.
6.Press [MENU] to cancel the scanning.
4.4 TP Scan
When you enter “TP Scan” menu a window like the one beside will be displayed.
1.On “Satellite” item, press [Volume Up/Down] to select the satellite you want to scan or press [OK] to open the satellite list for selection.
2.On “TP Index” item use [Volume Up/Down] to select the desired transponder or [Red] and [Green] key on the RCU for the related functions.
¾When you press [Red] it will display “New Carrier” in “TP Index” item. You have to set the parameters of “TP Frequency” and “Symbol Rate” for this new transponder. Therefore use the number buttons of the RCU. The available range are “3000~13450MHz” and “1000~45000KS/s”.
21