FIRST THINGS FIRST
CONNECTION C
GOOD PICTURE AND SOUND QUALITY
To use this connection you must have:
•TV with RF input (jack)
•VCR with RF and audio/video inputs
•Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box:
1. Connect coaxial cables and audio/video cables as shown.
To receive DSS® programming:
•Tune TV to channel 14 if you receive signals
•Tune TV to channel 65 if you receive signals from cable.
To receive off-air programming (no cable box):
1.Turn off VCR and DSS® receiver.
2.Tune TV to desired channel.
TV
DSS
RECEIVER
CABLE
OR
OFF-AIR ANTENNA
VCR
IN
SATELLITE
DISH
IN FROM ANT
VIDEO R L
AUDIO
OUT TO TV
SATELLITE IN
VIDEO R L
AUDIO
CH3 | IN FROM ANT VIDEO IN AUDIO IN | |
CH4 | R | L |
| ||
| OUT TO TV |
|
VIDEO OUT AUDIO OUT
To receive cable programming (with cable box):
1.Turn off VCR and DSS® receiver.
2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
To record DSS® programming:
1.Tune TV to the channel on which you receive the DSS® signal.
2.Tune DSS® receiver to desired channel.
3.Set VCR to record on line input.
To view VCR programming:
1.Tune TV to VCR output channel (usually CH3 or CH4).
2.Turn DSS® receiver off.
CAUTION
Do not stack electronic components or other objects on top of the DSS® receiver. See Safety Information, inside front cover.
12