REFERENCE
|
| AUX RF ANT IN | VCR CONTROL |
| |
|
|
|
| ||
IN |
|
|
|
|
|
FROM |
|
|
|
|
|
ANT |
|
|
|
|
|
VIDEO | R AUDIO L | WIDE BAND DATA | SATELLITE IN | LOW SPEED DATA | |
OUT |
|
|
| REMOTE IN |
|
TO |
|
|
|
| |
TV |
|
|
|
|
|
BACK PANEL CONTROLS
IN FROM ANT Use to connect an
OUT TO TV Use to connect the DSS® receiver to your TV. However, if your TV has audio/video jacks, you should use those jacks to get better picture and sound quality.
VIDEO Provides better picture quality than the OUT TO TV jack. If your TV has audio/video capability, use this jack to connect the DSS® receiver to your TV. You must also connect the AUDIO jacks.
AUDIO (R and L) Provide better sound quality than the OUT TO TV jack. If your TV has audio/video capability, use these jacks to connect the DSS® receiver to your TV. You must also connect the VIDEO jack.
AUX RF ANT IN Use to connect an optional RF antenna for RF remote signals. Connecting an antenna extends the remote’s range.
WIDE BAND DATA PORT This port allows you to connect the DSS® system to future services and accessories. A shielded cable and additional hardware may be required.
LOW SPEED DATA PORT this port allows you to connect the DSS® system to accessories, such as the Home Control base module.
SATELLITE IN Use to connect the DSS® receiver to the satellite dish antenna.
PHONE JACK Use to connect a phone line to the DSS® receiver. The DSS® system requires a phone line connection to periodically call out to program providers.
VCR CONTROL Allows the receiver to control your VCR.
REMOTE IN Use in conjunction with a remote control signal sender.
PHONE JACK
63