3 | 4 |
Turn On Your Entire System | Using the MAIN Menu |
Power on/off your entire system with the MAIN Menu by following these steps:
1.Touch the MAIN button to make sure that you are on the MAIN Menu. It doesn’t matter which page of the MAIN Menu is displayed.
2.Touch the On or Off button as desired. Wait until all components are correctly powered on or off. Turning on the system may take ten to twenty seconds.
3.If one component does not turn on/off, simply touch the button again.
TIP – The remote control will not respond to a new button push while is still issuing com- mands. While busy, the indicator flashes at the top of the screen next to the screen title.
The MAIN Menu enables you to either select a new Activity or simply select a new Device to control.
When you select a new activity, the remote control will issue a MACRO (a timed sequence of many commands from many different remote controls). This MACRO was custom pro- grammed for your system by your installer. It will issue all of the com- mands necessary to switch the sound and picture of your system.
When you select a device, the remote control becomes the remote control you select WITHOUT affecting the home theater.
Select a New ACTIVITY
1.Touch the MAIN button to make sure that you are on the MAIN Menu. Touch the PAGE button if you don’t see the activity you want.
2.Touch the activity button next to the desired screen label. For exam- ple if you wish to watch a DVD movie, touch the DVD button.