Humax IR-ACE II Mains Supply, Overloading, Liquid, Cleaning, Ventilation, Attachments, Earthing

Page 4

￿￿￿￿￿￿ ￿￿￿￿￿￿￿

This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully.

Safety Instructions and Precautions

1.MAINS SUPPLY

90-250V AC 50/60Hz

Operate this product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company.

Disconnect the product from the mains before you start any maintenance or installation procedures.

2.OVERLOADING

Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.

3.LIQUID

The product should not be exposed to liquid of any kind. In addition, no objects filled with liquid should be placed on the apparatus.

4.CLEANING

Disconnect the product from the wall outlet before cleaning.

Use a light damp cloth (no solvents) to dust the product.

5.VENTILATION

The slots on top of the product must be left uncovered to allow proper airflow into the unit.

Do not stand the product on soft furnishings or carpets.

Do not stack electronic equipments on top of the product.

6.ATTACHMENTS

Do not use any unsupported attachments as these may be hazardous or cause damage to the product.

7.CONNECTION TO THE SATELLITE DISH LNB

Disconnect the product from the mains before connecting or disconnecting the cable from the satellite dish. Failure to do so can damage the LNB.

8.CONNECTION TO THE TV

Disconnect the product from the mains before connecting or disconnecting the cable from the TV. Failure to do so can damage the TV.

9.EARTHING

The LNB cable must be earthed to the system earth for the satellite dish.

￿￿ ￿

Image 4
Contents Page Copyright Copyright 2008 Humax Corporation WarrantyTrademarks Meaning of Symbols Instruction about the ‘WEEE’ SymbolCleaning Mains SupplyOverloading LiquidReplacement of Parts LocationLIGHTNING, Storm or not in USE Extraneous ObjectsTo avoid electrical shock To avoid damage of the power cord or plugTo avoid damage of product Page Page Standby LED Standby ButtonVOL Button TV LEDStandby LED Smartcard Slot Slots for Smartcards Standby LED Power Cord LNBLNB OUT Audio L/RSource TV/RADIONUMERIC0-9 Buttons MenuStandby GuideExit ZOOM-BLUEPage ## + You can set the current time All RED Favourite GreenBouquet Yellow Satellite BlueAdd LockSkip DeletePage Style FindSchedule Group# # Time Setting Output SettingUHF Tuning OSD LanguageOrganising TV/Radio ChannelsOrganising All MoveRename Organising TV/Radio ChannelsOrganising Favourite Group A~DAntenna Setting Humax Auto SearchFixed Antenna Motor AntennaSignal Detection Humax SW UpdateIrdeto SW Update Conditional Access$ 30/ 732 /8 Page No picture on TV set Poor picture/sound qualityRemote control does not operate Cannot update new softwareNo or poor sound Cannot make reservationsNo or bad signal Channel isScrambled or not AvailableInput Connector Signal LevelLNB Power & Polarization Input Symbol RatePower Consumption Weight Net Operating TempVideo Audio# 769 /8