2. Antenna Setting
You can set antenna and LNB information to search services.
•Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV.
•Satellite Name: Displays the satellite list ordered by name. If the desired satellite name is not listed, then select User Defined. You can enter the Satellite Name using the keyboard displayed on the screen.
•LNB Frequency: Select the L.O (Local Oscillator) Frequency of the LNB.
•22KHz Tone: When using the 22HKz tone switch, select Enabled. Otherwise, select Disabled.
•DiSEqC Input: If you are using DiSEqC (Digital Satellite Equipment Control) switch to connect multiple antennas or LNBs, select DiSEqC input to connect to antenna or LNB.
•Motorised System: When using motorised system, select Enabled. Otherwise, select Disabled. When Motorised System is set to Enabled, DiSEqC Input is disabled.
•LNB Voltage: You can select Standard voltage or High voltage.
•LNB Power: You can turn LNB Power on or off.
When you complete the settings, press the OK button to move to the Manual
Search menu.
GB 17