3. Manual Search
You can search services of the selected satellite by transponders if you know the transponder information.
•Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for
SMATV.
•Frequency: Enter transponder frequency.
•Polarisation: Select the type of polarisation.
•Symbol Rate: Select or enter transponder symbol rate.
•FEC: Select FEC (Forward Error Correction).
•Network Search: If you want to search services for multiple transponders, select Yes. Otherwise, select No.
•Automatic Skip: When skipping all scrambled service search, select Yes. Otherwise, select No.
•Advanced: In advanced mode, enter Video Packet ID (PID), Audio PID, and PCR PID.
After setting the parameters of search, press the OK button to start service search. Wait a moment until the operation is completed.
After finishing search operation, the result window will be displayed. You can delete the services using the 
and RED button. To cancel deleting operation, press the RED button again. The screen also shows the information of the number of the found services and transponder.
To save the found services, press the OK button.
Note:
•If the antenna is correctly set up, the level at signal strength bar and quality bar, which are located at the bottom of the screen, are generally moved up.
•Press the EXIT button to stop search operation.
GB 18