9.Installation
In this chapter you can configure the installation setting and perform channel search. Menus such as channel search, software update and default setting are included in this section.
Note: Press the EXIT button to save the changes and return to the previous menu. Press the MENU button to exit the menu screen.
9.1 Channel Search
1.Press the MENU button.
2.Select Installation using the / button and press the OK button.
3.Select Channel Search using the/ button and press the OK button.
4.Select Frequency and select the frequency. You can enter the frequency directly using the
5.Select Symbol Rate and select the symbol rate. You can enter the symbol rate directly using the
6.Select Network ID and select the network ID. You can enter the network ID directly using the
7.Select Search and press the OK button. The channel search will start.
8.To stop the search, press the OK button during channel search.
9.The results will appear. Select Save and press the OK button.
Note: If there are no channels available, a message indicating the result will pop up.
GB53
User’s Manual