Humax HDPVR-1000C manual Trouble Shooting, GB75

Page 76

14. Appendix

14.2 Trouble Shooting

Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions.

1. No message displayed on the front panel. (The product will not switch on.)

Check the main power cable and make sure it is plugged into a suitable power outlet.

Check that the mains supply is switched on.

Check that the power switch is on at the rear of the product. (where applicable)

Connect the power cable to a different power outlet.

2. No picture on TV set

Make sure that the product is powered on and in operation mode. (Press the STANDBY button)

Make sure that the AV cable is firmly connected to the TV.

Make sure that the cable is properly connected to the product.

Be sure to activate channel search.

Check the brightness level of the TV.

Check if the channel is currently on air. Contact the broadcaster to ensure that the channel is running.

Press the SOURCE button if the product is in external input mode.

3. No or poor sound

Check that your AV cable is connected correctly.

Check the volume levels of your TV set and the product.

Check if the product or TV is on mute.

Check audio type or soundtrack option in the AV menu.

4. Remote control does not operate.

To control the product, the top end of the remote control should point directly towards the receiving part of the product.

Remove and reinsert the batteries in the remote control.

Replace the batteries in the remote control for a new set.

5. Cannot make reservations.

Check that no previous reservations are conflicting with the new reservation.

6.No password information is given.

The default password is always 0000.

7. Channel search does not work.

Check that your cable is connected correctly.

8. Cannot update new software.

You can get an update. If the product does not show a message requesting update, that means no software is available.

9.Cannot watch scrambled channels.

Check that you have the appropriate Smartcard or CI-Module. Reinsert the Smartcard or CI-Module and make sure it initializes correctly.

Check in the menu that the product is detecting the Smartcard or CI-Module.

Check in the menu that you have a valid and working subscription to the channels you wish to view.

Ensure that the Smartcard or CI-Module is not damaged.

It may take up to 60 minutes to receive authorization for the subscription.

GB75

User’s Manual

Image 76
Contents HDPVR-1000C Copyright Copyright 2008 Humax Corporation WarrantyTrademarks Meaning of Symbols Instruction about the ‘WEEE’ SymbolDomestic users Business usersSafety Warning Safety Instructions and PrecautionsExtraneous Objects Contents Personal Video Recorder PVR GB68Before Using the Product Package ContentsFront Panel Standby ButtonOK/LIST Button CH-/CH+ ButtonInserting the Smartcard Conditional AccessSmartcard Rear Panel GB10Remote Control GB11GB12 GB13 Remote Control Batteries GB14Using Hdmi Cable SetupGB15 When equipped with an A/V receiver Using DVI ConverterGB16 When there is no A/V receiver available GB17Using Component Cable GB18Using Scart Cable GB19Powering On GB20Installation Wizard LanguageSearch Channels GB21HDD Partition DisplayGB22 Installation Checklist ResultGB23 Step Done?Switching Channel Volume ControlResolution Basic OperationSleep WideGB25 Screen ratio Format Icon and TextSubtitle AudioGB26 Teletext Programme Information i-plateGeneral Information GB27Detailed Programme Information GB28Channel List My TV ListGB29 HD YellowOption ConfigurationGB30 HD List Favourite ListGB31 Pay Per View Channels History ListGB32 Using TV Guide TV GuideTable Guide GB33EPG List ScheduleInstant Reservation GB34Editing Reservations Deleting ReservationsNew Reservation GB35Find Search by KeywordSearch by Genre GB36Search Result Search by Time and DayGB37 Preferences Parental ControlAge Limit GB38Change Password Installation LockCA-PIN for Reservation GB39Language Setting Menu LanguageAudio Language GB40Subtitle Language Subtitle DisplaySubtitle Font GB41Time Setting Power onPower on Channel GB42System Update Time Power OFFGB43 Media Setting HDD ControlUSB Control GB44Recording Options GB45A/V Setting GB46Audio Output Dolby Digital OutputLip-Sync Screen RatioOther Settings Info Display TimeOSD Transparency GB48Edit Channels Edit Channel ListLocking/Unlocking Channels GB49Select/Release All Selecting a Channel GroupGB50 Edit Favourite List Adding/Removing ChannelsSelecting Favourite Groups Select All/Release AllMoving Favourite Channels Renaming Favourite GroupsGB52 Channel Search InstallationGB53 Default Setting Software UpdateGB54 Signal Detection SystemStatus GB55Subscription Status Event StatusTokens Status Change CA PINMaturity Rating MessagesAbout Conax CA GB57Video Media ListGB58 Play List Play OptionGB59 GB60 Select a file in the video list and press the OPT+ buttonEdit Mode GB61Radio GB62GB63 Music Player MusicGB64 File Information GB65Photo GB66Slide Show Photo ViewerGB67 Personal Video Recorder PVR Play barTime Shifted Recording TSR and Playback PlaybackTSR Fast ForwardFast Rewind Slow MotionRecording General RecordingPause GB70Multi-Channel Recording Recording DurationStop Recording GB71 Bookmark Adding Bookmark Bookmark List GB72Software Update Software update while watching a programmeOTA Over the Air GB73Menu Map AppendixGB74 Trouble Shooting GB75GB76 Error Message GB77Specification GB78RAM EepromGB79 USBGlossary GB80GB81 ScartService and Support GB82GB83 PuhAukioloajat KieliRemote Control Code List Using the universal remote controlRemote Control Function List GB84GB85 TV Code List GB86GB87 GB88 GB89 GB90 GB91 GB92 DVD Code List GB93Audio & AUX Code List GB94GB95 20000-00060PT