Humax HDCI-2000 manual Smatv Search, Smatv Automatic Search, Start/End Frequency

10.3 SMATV Search

SMATV Search allows you to perform channel search regardless of the setting value in antenna setting.

1.Press the MENU button.

2.Select Installation using the button and press the OK button.

3.Select SMATV Search using the button, and press the OK button.

4.Select Search Type using the button.

5.Select one option from Auto and Manual using the OK or button.

1.SMATV Automatic Search

Start/End Frequency

1.Select Start/End Frequency using the button.

2.Enter the frequency using the NUMERIC(0-9)buttons.

Note: Enter the frequency from 950 to 2150 MHz.

**

Symbol Rate

1.Select Symbol Rate using the button.

2.Select one option among 27500, 26000 and 22000 using the OK

or button. If the required value does not exist, select User Define and enter the symbol rate directly.

**

Note: You can enter up to four symbol rates.

Select Search and press the OK button.

GB 69