Main Menu Guide
Satellite Name
Selects the satellite name that corresponds to the value of the Antenna Alternative.
Press the | buttons and the satellite names you can memorize | |
will be listed on the screen. | ||
Use the |
| buttons to select a satellite name and then press |
the | button. | |
This name will help you Select Antenna Alternative In Manual Search menu.
note : Press User defined and the keyboard image will appear on the screen. Then you can enter satellite names.
LNB Frequency
Use the 
buttons to select a LNB frequency or type on the dish. You can select the LNB Frequency.
If the required LNB frequency is not available, then press the Number buttons(0~9) on the remote control.
22KHz Tone
Use the 
buttons to select the antenna tone switch when LNB Frequency is universal.
22KHz tone will be switched automatically.
DiSEqC Input
Use the 
buttons to select a DiSEqC antenna switch type. (according to the option and location of DiSEqC switch)
•Type : Disabled, Tone Burst A to B, DiSEqC A, DiSEqC B, DiSEqC C, DiSEqC D.
Motorized System
It disables/enables the motorise function. Set this according to the used antenna.
If you wish to use this system, please refer to page GB37.
LNB Voltage
It sets the level of LNB voltage. The LNB voltage may be dropped too low to supply power to LNB owing to long length of the signal line. To compensate the voltage drop, the item shall be set as “High”.