DirecTV HAH-SA manual Adjusting system settings

Adjusting system settings

Select the System tab from the MAIN MENU to access the system functions described in this section. Use the PREFERENCES menu pane (shown in the figure below) to change the appearance of the on-screen menus and select how your DIRECTV® Receiver operates with other devices. The PREFERENCES pane also allows you to:

•Set the receiver output channel to channel 3 or 4

•Enable or disable the INPUT button on your remote control.

•Select English or Spanish language menus.

•Specify your time zone.

•Enable or disable daylight saving time

•Select full or short channel banner style

•Enable or disable Caller ID

PREFERENCES		Fri, Oct 4	1:53PM
Install	Preference Settings
Signal
Info	Output Channel	3
Features	Input Key	On
VCR	Menu Language	English
Prefs	Time zone	Default
Test
Remote	Daylight Saving	Observed
Test
	Banner Style	Short
New Card
	Caller ID	On
Upgrade
Watch TV
Main Menu	Factory Defaults

Set output channel	Use the Output Channel menu button to toggle between channels 3 and 4,
	whichever is unused in your area.
Input key enable/disable	The Input Key menu button allows you to turn the remote control INPUT button
	on and off.
Select menu language	The Menu Language button allows you to display on-screen menus in English
	(default) or Spanish.
Caller ID enable/disable	Use the Caller ID menu button to turn the Caller ID feature on and off.
	Incoming calls will not be displayed on-screen when the Caller ID feature is
	disabled.
	Note: You must subscribe to Caller ID service from your telephone company to
	use this feature.
Restore factory default	SELECT the Factory Defaults menu button to restore the PREFERENCES
settings	options to the original factory settings.
	Antenna, Signal, and Test functions are described Chapter 1 – Getting Started.

Using the menus 31