Kathrein UFE 371/S manual Software Update, Service@esc-kathrein.de

Installation Menu

Software Update

Attention:	A PC and a null-modem cable are required for the update process!
	If new software for your DVB-T receiver should become available, you
	can download it from the following homepage:
		www.esc-kathrein.de/download/
	There you will also find information and notes on the software update
	process via the RS 232 interface on the receiver. You can also order
	the required null-modem cable from the ESC company in Grassau at
	the following address:
	ESC Elektronik Service
	Chiemgau GmbH
	Bahnhofstraße 108
	83224 Grassau
	Tel.:	(0 86 41) 95 45-0
	Fax.:	(0 86 41) 95 45 35 u. 95 45 36
	E-mail:	service@esc-kathrein.de
	Internet:	http://www.esc-kathrein.de
Note:	After successful software download of the software, you must carry out
	a works reset. Your old password is no longer valid after the software
	update. You must now enter the universal password (0786).
	You will find instructions how to carry out the works reset on Page 25.

27