Kathrein UFE 371/S manual Clock Parameters

Installation Menu

Clock Parameters

Date and time must be programmed in order that the receiver indicates the correct information messages when you use the timers, and in the information messages mode (and on the front in stand-by mode).

	The internal clock can be set as follows:
	a) The transmitted time of day can be used (default setting). In
	this case, the difference between GMT and local time must
	be allowed for (in Germany, + 2 hrs. In summer, + 1 hr. in
	winter).
	b) If you select «AUS» (off) in the first field, you must enter the
	time and date manually, with the numeric keypad.
Note:	Some programmes may not transmit correct UTC. In this case, the
	receiver displays the wrong time of day. To display the time of day you
	had before, switch to another European programme, and wait a few
	minutes until the receiver shows the correct time again.

24