Remote Control
Using the Remote Control
You can use the OK key to confirm the individual settings in the menus or to call up
Change each setting line by line, and confirm the entry by pressing the OK key.
Press EXIT key to leave the menu, or change from a
Use the / keys to navigate through the menus. Use the / keys to enter the individual requirements. You can also enter the values in the appropriate fields using the numeric keypad.
The coloured keys are used for the functions within the various sub- menus. The functions of the respective menu are displayed on the screen.
A line in which the individual functions are explained appears in each menu.
Inserting Batteries in the Remote Control
Remove the cover on the rear of the remote control. Insert the two batteries supplied into the remote control, ensuring correct polarity which is shown on the base of the battery compartment.
Slide the cover back onto the housing until it locks in place.
Used batteries are special waste. Do not throw used batteries into your household waste; take them to a collection point for old batteries!
Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 on used electrical and electronic equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal at a designated public collection point.
8