Kathrein MSK 200/S2 General Operation, Help Function, Keyboard Operation, Setup Help Lang

GENERAL OPERATION

THE HELP FUNCTION

The MSK 200‘s help function follows a new concept. All help files have been saved in the MSK 200 and can be called up whenever required. All you have to do to call up the help menu is to press the -key at any time when operating the MSK 200. The appropriate help menu will then be displayed on the screen.

CHANGE THE HELP MENU’S DISPLAY LANGUAGE

In order to change the help menu’s display language, please carry out the following steps:

“SETUP”	“HELP LANG”	choose the required language from the
		displayed list
Attention:

Proceed as follows to receive help on signal source and measurement parameters:

(content) “Operation“

KEYBOARD OPERATION

SETTINGS: SAVE, SETUP, COPY, PRINT

Switching the device ON/OFF, or to standby mode. If the button is kept pressed more than 5 seconds, the device is switched off.

Switching the SOFTKEYS ON/OFF, zooming in the graphic display

SELECTING SOURCES: SAT analogue, SAT digital, CATV analogue, CATV digital, TV ana- logue, TV digital, FM radio, AV menu

SAVING and PRINTING data: Saving and triggering device settings

SELECTING SIGNAL METER: spectrum analyser, oscilloscope, constellation analyser, entire measurement, Auto-Messung, DiSEqCTM, UFO®micro-DiSEqCTM, MPEG data, picture repre- sentation

Increasing the VOLUME

Reducing the VOLUME

PROGRAMME STEPPING +

PROGRAMME STEPPING -

9