Kathrein MFK 16 manual Selecting the individual channels, Selecting different measuring methods

Getting started

To find the regions you want, scroll through the stored list. To switch regions, press and hold down the right or left arrow button for about 5 seconds.

The meter is factory pre-programmed with the following German regions:

Berlin VHF

Berlin UHF

Bremen/Unterweser

Düsseldorf

Frankfurt VHF

Frankfurt UHF

Hamburg/Lübeck VHF

Hamburg/Lübeck UHF

Hanover/Braunschweig VHF

Hanover/Braunschweig UHF

Kiel VHF

Kiel UHF

Cologne/Bonn

Munich VHF

Munich UHF

Nuremberg VHF

Nuremberg UHF

All VHF channels 5-12

All UHF channels 21-69

Additional region lists can be obtained as required from the Kathrein website “www.kathrein.de”.

Selecting the individual channels

Press and hold down the right or left arrow button for less than 5 seconds to select the various channels.

Selecting different measuring methods

The meter is able to measure the RF signal level (analogue and digital channels), “BER” (Bit Error Rate) as a bar indicator for “Pre BER” and as a numeric value for “Post VITERBI BER”. The “BER” can only be measured on digital channels.

Press the “ON” button to toggle between “RF” and “BER” mode.

10