Safety instructions – important notes
This page contains important information on operating and connecting up the unit. Read these instructions carefully before setting up the unit.
DANGER!
WARNING!
ATTENTION!
Mains power cable
Make sure that the mains power cable (power supply cable) is not damaged. Units with damaged power cables must be disconnected from the mains power (by pulling the mains plug) and be replaced by a qualified electrician prior to restarting. Use only the power cable supplied!
Risk of death due to electric shock!
Cleaning
Pull the mains plug before cleaning the unit. Only use a dry cloth for cleaning and only clean the outer surface. Never open the unit.
Touching the parts inside the unit carries a risk of death due to electric shock!
Playing children
Ensure that children do not touch any parts inside the unit.
Risk of death due to electric shock!
Mains voltage
Only operate the unit at the specified mains voltage (indicated on the underside of the unit)! If the mains voltage is too high, there is a risk of fire!
Repairs
Ensure that any repairsto your unit are only carried out by qualified personnel. If you open the unit and attempt to repair it yourself any warranty claims will be voided!
Improper intervention into the unit may place at risk its electrical safety.
The manufacturer shall accept no liability for accidents suffered by the user after opening the unit!
Connections
Incorrect wiring of the connections can lead to malfunctions or defects in the unit!
Long periods of absence / storms
Always disconnect the unit from the mains power by pulling the plug if you are going to be away for a lengthy period of time or in a storm.
Damp, sunlight, heat
The unit should be protected from damp, dripping water and splashing. Do not place the unit close to the heating or expose it to direct sunlight and do not operate it in damp locations.
6