Getting started, Switching on the meter

Getting started

Switching on the meter

Connect the MFK 16 input on the front of the unit by a BNC cable to the antenna. Alternatively, you can use the BNC/IEC, the BNC/F adapter and the standard antenna cable (IEC).

Press and hold for 5 seconds

The display first shows the version number and the battery state of charge. The meter automatically switches to the next display readout.

Region

Channel no.

Battery charge

Signal level (RF level) as bar indicator in range 25 to 75 dBμV with over/under range indicator.

The second display readout indicates:

-the last region selected,

-the channel number,

-the received HF level in dBμV as a bar indicator,

-the battery state of charge.

Selecting a region

The factory pre-programmed regions enable users to scroll through the channels in their respective region. This means both analogue (in RF level mode) and digital transmissions (in BER mode) can be detected. Each region has more than one transmission channel. Each channel is designated as a MUX (multiplexer). Each MUX transmits multiple stations.