3.Delete All: Press OK key to pop up the
dialogue "Are you sure to clear set satellite position of this tuner?". Press OK key at the Yes button to clear all the memories about the position of the satellites that has connected to the current turner.
4.Motor Setting: Press OK key to the Motor Setting window.
Satellite: Press 
keys to select the satellite in circle. Or press OK key to pop up the drop- down list, then select the desired satellite in the list and press OK key to confirm.
Transponder: The same operation as the above.
Position No., & Save: The range is from 0 to 63. "0" delegates the original position. You can select the proper value when you has rotated the antenna.
Go to X: Press OK key to pop up the
(reference or from 1to 63) to realize the selected position. |
| |
West <Save> East: Press | key to turn west, while press | key to turn east. |
Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK key at the Yes button to save the current position, or press OK key at the No button to cancel the operation.
Recalculation: Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK key at the Yes button to recalculation.
5.Limit Setup: Press OK key to pop up the
Limit Setup window. |
|
Limit Setup: Press | keys to switch among |
Disable Limit, East Limit and West Limit.
Limit Setup: Move cursor to the Limit Setup
button. You can press | key to turn west , or | |||
press | key to turn east. |
|
|
|
Go to Reference: Press OK key to | go | to | ||
reference. If you select | Disable Limit | in | the | |
above Limit Setup item, this button will turn grey.