Anritsu Series MS278XB operation manual LAN Setup, Network Connections, Network Interface Setup

Remote Interface Setup Preparation for Use

LAN Setup

The LAN can be set up via the RJ45 Ethernet port.

Network Connections

The MS278XB supports 10/100 BASE-T. You can connect the analyzer directly to your LAN via the RJ45 connector on the rear panel. Refer to Figure 2-14, below, for an illustration.

Figure 2-15.Ethernet Connection

Network Interface Setup

TCP/IP connectivity requires setting up the parameters described at the beginning of this section. You may need to contact your network administrator or refer to your network documentation for further assistance. The following procedure is a general overview of how to set up a general LAN connection on both the MS278XB and the remote machine. The actual menus and sequence may vary.

1.From the Start menu, select Control Panel.

Figure 2-16. Start Menu

2-16 MS278XB OM