Parameter Entry and Measurement Setup Dialog Archive | Front Panel Menus |
Multicarrier Channel Power Setup Dialog
Multicarrier Channel Power is similar to the ACP measurement and can be set up as follows:
Transmit Channels Tab
Number of Channels: Sets the number of channels.
Range: Integers from +1 to +12 channels (Do not enter negative numbers) Default: 12 channels
Channel Width: Sets the channel width for each of the channels.
Range: 1 Hz to 8 GHz
Default: 5 MHz
Channel Spacing: Sets the channel spacing for each of the channels.
Range: +1 Hz≤Channel Spacing≤8 GHz
Default: 10 MHz
Scroll Buttons: Scrolls up or down the channel list.
Figure 4-16. Multicarrier Channel Power Setup Dialog
MS278XB OM |
