Preparation for Use | Connecting External Devices |
3.Select the location of your network printer and press Find Now, then select your printer from the list and press OK.
Figure 2-34. Add Printer Wizard
4.Press Finish to complete the Add Printer Wizard.
Connecting an External USB Device
The external USB interface is a standard Type A, USB connector that supports the USB 2.0 standard. Signature can interface with a variety of external USB devices, such as a keyboard, mouse, printer, scanner, drive, or camera. The USB interface offers the same behavior that is typically experienced in the Windows environment. You may connect your USB devices as directed by the manufacturer’s instructions.
Note: A USB mouse may require a hot connection while the instrument is in the Operate mode with the Signature software running. If a USB mouse fails to operate when the instrument is started with the mouse plugged into the USB port, reboot the instrument with the mouse disconnected and make the hot connection after the Signature software is running.
MS278XB OM |
