Anritsu Series MS278XB operation manual Menu Archive Front Panel Menus Sweep Menu

Menu Archive Front Panel Menus

Sweep Menu

The Sweep menu lets you lets you select between continuous or single sweep modes, and to start a single sweep.

Table 4-17. Sweep Menu

Sweep Time: To set the sweep time, press in the Sweep Time parameter field and enter the desired sweep time value. When a new value is entered, the terminator fly-out will appear with the available units. Press on the desired units to terminate the entry.

To change between manual or auto sweep time, press on the Manual/Auto toggle button.

Sweep Mode: To toggle the sweep mode between continuous and single sweep, press the Continuous/Single toggle button.

When in the Single Sweep mode, press the Sweep button to trigger a new sweep.

Sweep Type: To change the sweep type, press the Sweep Type button and select the desired sweep mode from the following fly-out menu selections:

Swept: Selects a normal sweep.

FFT: Selects a Fast Fourier Transform sweep (maximum span limited to 1 MHz)

FFT WideBand: Selects a Wideband Fast Fourier Transform sweep with spans up to 30 MHz (requires Option 22).

4-28 MS278XB OM