Anritsu Series MS278XB operation manual Menu Archive Front Panel Menus, Phase Noise

Menu Archive	Front Panel Menus
Table 4-13.Measurement Menu
WiMAX Measurement	WiMAX Measurement Type: To change the measurement type, press on the
Type	Measurement Type button and select one of the following measurement types from the
	fly-out menu:
	Spectrum: Selects the spectrum analysis mode (see above)
	RF: Selects the RF measurement mode (see above)
	QAM/PSK: Selects the modulation measurement mode (see above)
	WCDMA: Selects the modulation measurement mode
	WiMAX: Launches the WiMAX Analysis application (requires Options 22 and 41)
	Phase Noise: Launches the Phase Noise Measurement application (requires
	Option 52)
	The WiMAX measurement selection launches the WiMAX Analysis application in a
	separate window. Refer to the Signature™ Option 41 SignalLab WiMAX Analysis
	Software User Guide, part number: 10410-00276 for information on WiMAX
	measurements using Signature.

Phase Noise	Phase Noise Measurement Type: To change the measurement type, press on the
Measurement Type	Measurement Type button and select one of the following measurement types from the
	fly-out menu:
	Spectrum: Selects the spectrum analysis mode (see above)
	RF: Selects the RF measurement mode (see above)
	QAM/PSK: Selects the modulation measurement mode (see above)
	WCDMA: Selects the modulation measurement mode
	WiMAX: Launches the WiMAX Analysis application (requires Options 22 and 41)
	Phase Noise: Launches the Phase Noise Measurement application (requires
	Option 52)
	The Phase Noise measurement selection launches the Phase Noise Measurement
	application in a separate window.

Note: All RF measurements apply only to the active trace.

4-22 MS278XB OM