Anritsu Series MS278XB Modulation Analysis Config Tab, Constellation Rotation Select 0 degrees

	Front Panel Menus	Parameter Entry and Measurement Setup Dialog Archive
	Demodulation Config (2) Tab		IQ Origin Offset for EVM: Select to include or
			exclude the IQ origin offset for the error vector
			magnitude.
			PCDE Spread Factor: Select either 4 or 256 for
			the peak code domain error spreading factor.
			EVM: Select the Y-axis scale for the error vector
			magnitude of 5%, 10%, 20%, 50%, or 100%.
			Magnitude Error: Select the magnitude error of
			5%, 10%, 20%, 50%, or 100%.
			Phase Error: Select the phase error of ±5
			degrees, ±10 degrees, ±20 degrees, ±50 degrees,
			±100 degrees, ±180 degrees.
			Code Domain Power: Select between Relative to
			Total Power or Absolute.
			CDP Zoom Factor: Select the code domain zoom
			factor of 4x, 16x, or 64x.
			Base Station/User Equipment: Uplink or
			Downlink.
	Modulation Analysis Config Tab
			Format: Select either Hex or Binary.
			Sync to Pilot Bits: Select synchronization On or
			Off.
			Constellation Rotation: Select 0 degrees,
			90 degrees, 180 degrees, or 270 degrees.
			SCH Compensation: Select the synchronizing
			channel compensation either On or Off.
			PICH Compensation: Select the pilot channel
			compensation either On or Off.
			PICH Channel Number: Enter the pilot channel
			number.
			PICH Timing Offset: Enter the pilot channel
			timing offset.
			SCH Threshold: Enter the SCH threshold.
			Base Station/User Equipment: Uplink or
			Downlink.
Figure 4-21.WCDMA Setup Dialog

MS278XB OM 4-53