Philips 40PFL5805H, 40PFL6605H Enable or disable EasyLink Remote Control, EasyLink buttons

To enable Pixel Plus Link

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [Pixel Plus link] > [On]. 3. Press OK to activate.

Auto subtitle shift

Auto subtitle shift displays subtitles from Philips EasyLink compliant Home Theatre Systems over the video image on your TV. The video image is thus stretched across the whole of your TV display, without the need to create a separate subtitle bar at the bottom of the screen.

To enable auto subtitle shift

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [Auto subtitle shift].

3. Select [On], then press OK to activate.

Audio only mode

Audio only mode enables you to play audio from a connected Philips EasyLink device through the TV speakers while the TV is in standby.

Press to receive audio from the connected Philips EasyLink device.

If available, audio only mode is enabled. Accept the prompt on the TV to enable audio only mode.

∙Control the audio playback with the TV remote control.

Enable or disable EasyLink Remote Control

Caution: This is an advanced setting. Verify that all connected HDMI-CEC compliant devices support this setting. Devices that do not support this setting will not respond to commands from the TV remote control.

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [EasyLink Remote Control] > [On] or [Off].

3. Press OK to activate.

Notes:

∙If you cannot exit from the connected device's menu, press .

∙To switch back to TV control, press and select [Watch TV].

∙To control another device, press and select the device from the home menu.

∙A summary of EasyLink buttons you can

use with the TV remote control is available at Connect the TV > Use Philips EasyLink > EasyLink buttons (Page 51).

EasyLink buttons

Control HDMI-CEC compliant devices with the following buttons on the TV remote control.

∙OK: Starts, pauses or resumes playback on the connected device. Also activates a selection or accesses the menu of the device.

∙ (Previous) / (Next): Searches backwards and forwards on the connected device.

∙Numeric buttons: When EasyLink is enabled, selects a title, chapter or track.

∙ (Options): Displays the menu of the

connected device. When is pressed, the TV menu is displayed.

∙ (Standby): Press to enable one-touch standby. This switches the TV and the connected device to standby.

Other EasyLink buttons are available via On-Screen Remote Control (OSRC).

To access the OSRC

1.While watching a connected device, press

.

2.Select [Show remote control], then press OK.

3.Use the Navigation buttons and OK to select and use an on-screen button.

4.Press to exit.

Configure TV speakers

You usually connect the TV to an HDMI-CEC compliant device such as a HTS using both an HDMI cable for video and a digital audio cable for audio. You can output TV audio through the HDMI cable solely,

provided both the TV and device are HDMI ARC compliant (see Connect the TV > Use

Philips EasyLink > Use HDMI ARC (Page 52)).

EN 51

English