Philips 40PFL5605H, 40PFL6605H Connect the TV, First connections, About cables, Power, Antenna

5 Connect the TV

First connections

Power

NonPublish

Be sure that the power plug in the wall socket is accessible at all times. When disconnecting the power cable, always pull the plug, never the cable.

Although this TV has a very low standby power consumption, switch off the TV using the power switch on the bottom of the TV if you do not use the TV for a long time.

Antenna
NonPublish
Locate the antenna connector at the back of	English
the TV. Insert the antenna cable securely
into the antenna connector.
Note: To receive DVB-S broadcasts, insert
the antenna cable into the SAT (DVB-S)
connector on the side of the TV. This is
available on certain models only.

About cables

Overview

NonPublish

Before you connect devices to the TV, verify which connectors are available on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound.

The connections shown in this user manual are recommendations only. Other solutions are possible.

Tip: If your device only has composite/RCA connectors, use a SCART-cinch adapter to connect the device to a SCART connector on the TV.

Add your devices

When you have connected a device to the TV, always add this device as an item in the home menu. With this item in the home menu, you can easily switch the TV to this device.

EN 37