![](/images/new-backgrounds/1128512/12851299x1.webp)
VGA cable
Use Philips EasyLink
Enable or disable EasyLink
NonPublish
Philips EasyLink provides several features that enable you to control devices that are connected via HDMI. Connected devices must support the
Note:
To enable or disable EasyLink
Note: Do not enable Philips EasyLink if you do not intend to use it.
1.Press .
2.Select [Setup] > [TV settings] >
[EasyLink] > [On] or [Off], then press OK.
EasyLink features
NonPublish
With Philips EasyLink enabled, the following features are available:
When you play content from an
EN 50
When you connect your TV to an on the TV remote control switches the TV and all connected HDMI devices to standby mode.
System audio control
When you connect your TV to, for example, an
For more information about system audio
control and other types of TV speaker configurations, see Connect the TV > Use
Philips EasyLink > TV speakers (Page 51). EasyLink Remote Control
EasyLink Remote Control allows you to control
To enable EasyLink Remote Control, see Connect the TV > Use Philips EasyLink >
Enable or disable EasyLink Remote Control
(Page 51).
Pixel Plus Link
Connected Philips EasyLink devices may apply their own picture quality processing to a video, before streaming it to the TV. This may interfere with the image processing of the TV. Enable Pixel Plus Link to discard picture quality processing from connected Philips EasyLink devices.