EN 21
English
[Auto fill]: Automatically enlarges the
picture to fill the screen. Minimal
picture distortion, subtitles remain
visible. Not for PC input.
[Auto zoom]: Automatically zooms the
picture in to fill the screen as much as
possible, without distortion. Black bars
may be visible. Not for PC input.
[Super zoom]: Removes the black bars
on the sides of 4:3 broadcasts. Not for
HD or PC.
[Movie expand 16:9]: Scales the classic
4:3 format to 16:9. Not recommended
for HD or PC.
[Wide screen]: Stretches the classic 4:3
format to 16:9.
[Unscaled]: Provides maximum detail
for PC. Only available when [PC mode]
is enabled in the [Picture] menu.
Notes:
Depending on the picture source, some
picture formats are not available and
will not be seen on-screen.
Watch a connected device

Add new device

NonPublish
Notes:
Before watching a connected device,
you must add it to the home menu.
HDMI ARC compliant devices
connected to the HDMI ARC
connector on the TV are automatically
added to the home menu.
1. Connect and switch on the device.
2. Press .
3. Select [Add your devices], then press
OK. Follow the on-screen instructions.

Watch connected device

NonPublish
1. Press .
2. Select the device from the home menu.
3. Press OK to confirm your choice.
Use Ambilight

Switch on Ambilight

(Available on certain models only.)
Enjoy a more relaxed viewing experience
and improved perceived picture quality. Dim
the lighting conditions in the room for the
best Ambilight effect.
Caution
To avoid bad infrared remote control
reception, place your devices out of sight of
Ambilight.
1. Press (Experience).
2. Select [Ambilight], then press OK.
3. To switch Ambilight on or off, select [On]
or [Off].
You can also press on the TV to switch
Ambilight on or off.

Set up Ambilight

(Available on certain models only.)
In the Ambilight menu, you can access more
Ambilight settings.
While watching TV, press > [Setup] >
[TV settings] > [Ambilight].
Select a setting to adjust:
• [Dynamic]: Adjusts Ambilight
between relaxed and dynamic levels.
Available only if Ambilight [Colour] is
set to [Dynamic].
• [Brightness]: Adjusts the
brightness of Ambilight.