Front Panel Menus | Parameter Entry and Measurement Setup Dialog Archive |
Channel Table Editor Dialog
The Channel Table Editor dialog lets you manually enter the active code channel setup.
Channel Table Editor
The Channel Table Editor is used to create or edit channel tables.
Scroll Bar: Use the scroll bar to scroll through the channel codes.
Table Name: Enter the table name, select a table to Open, or use the last measured table.
When the Edit table is selected, the table parameters below become available.
Enter the Code Number, select the Spreading Factor and note the Symbol Rate.
Choose the Modulation Type of Auto, 16QAM, or QPSK.
When the New Code button is selected, the incompatible code parameters become available.
Configure the code parameters as described above or select to delete a code.
Channel Table Test Models
The Channel Table Test Models dialog allows selection of one of eleven common WCDMA test models.
Figure 4-23. Channel Table Dialogs
MS278XB OM |
