Anritsu Series MS278XB operation manual DVD-ROM/CD-RW Drive, Function Specification

Models: Series MS278XB

1 276
Download 276 pages 25.45 Kb
Page 62
Image 62

Front Panel Overview

Instrument Overview

DVD-ROM/CD-RW Drive

The DVD-ROM/CD-RW drive is capable of reading digitally stored data on a variety of CD media. The drive is also capable of writing digital data to CD-R and CD-RW media. You can use either 12 cm or 8 cm diameter media. The DVD-ROM/CD-RW drive supports ATA Packet Interface (ATAPI), revision 2.6. Performance specifications for the drive are listed in Table 3-4.

Table 3-4.DVD-ROM/CD-RW Performance Specifications

Function

Specification

 

 

Compatible Read Disk Types

CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE,

 

CD-I, CD-I BRIDGE (PHOTO-CD, VIDEO-CD), CD-R, CD-RW, and

 

MULTISESSION (PHOTO-CD, CD EXTRA, PORTFOLIO), DVD-ROM (DVD-5,

 

DVD-9, DVD-10, DVD-18), DVD-R (VER 1.0 and 2.0), DVD-RW (VER 1.1),

 

DVD-RAM (VER 2.1)

 

 

Compatible Write Disk Types

CD-R and CD-RW of types listed above

 

 

Compatible Write Format

Disk at Once

 

Track at Once

 

Session at Once

 

Packet Write

Data Capacity (write)

Mode 1: 2048 Bytes/Block

 

656.5 Megabytes/Disk

 

Mode 2: 2336 Bytes/Block

 

748.8 Megabytes/Disk

 

 

Access Time

DVD-ROM: 100 ms

 

DVD-RAM: 170 ms

 

CD-ROM: 90 ms

 

 

Maximum Read Speed

CD-ROM: 24 Times

 

DVD-ROM: 8 Times

Maximum Sustained Data

CD-ROM Mode 1: 3600 Kilobytes/sec.

Transfer Rate (read)

CD-ROM Mode 2: 4104 Kilobytes/sec.

 

DVD-ROM Single: 10,820 Kilobytes/sec.

 

 

Maximum Write Speed

CD-R: 24 Times

 

CD-RW: 4 Times

 

(10 times for high speed CD-RW media)

 

 

Maximum Rotational Speed

5100 RPM (CD-ROM, CD-R)

 

 

Data Buffer Capacity

2 Megabytes

 

 

Caution: Do not use storage media that is of the incorrect type, such as improperly formatted CDs. Do not insert more than one disk at a time into the drive tray.

Do not use excessive force when loading or ejecting disks.

Failure to follow these cautions could result in loss of data or damage to the equipment.

Manually Ejecting the DVD-ROM/CD-RW Drive Tray

If the CD-RW drive tray fails to eject, a paper clip can be used to release the tray for manual ejection.

Warning: Before proceeding, power down the instrument and remove the power cord from the rear panel power receptacle.

3-10

MS278XB OM

Page 62
Image 62
Anritsu Series MS278XB operation manual Function Specification, Manually Ejecting the DVD-ROM/CD-RW Drive Tray