Parameter Entry and Measurement Setup Dialog Archive | Front Panel Menus |
Demodulation Config (1) Tab
Scrambling Code: Manually sets the modulation scrambling code or selects Auto.
Scramble Code Type: Selects between long and short.
Scramble Code for Compressed Channel: Select between Ordinary, Left Alternate, or Right Alternate.
Display “Compressed Mode” Signals: Select Off, Auto Mode Selection, or Manual.
Spread Factor: Select the spreading factor of 4, 8, 16, 32, 64, 128, or Max Spread Factor.
(must select Manual Compressed Mode for this option)
Active Code Channels: Select between Auto, Test Models, or Manually Entered (refer to the Channel Table Dialogs on page
Active Channel Threshold: Enter the active channel threshold in dB.
Range:
Resolution: 1 dB
Default:
IQ Display Rotation: Select the IQ display rotation of 0 degrees or 45 degrees.
Max Spread Factor: Select the maximum spreading factor of 256 or 512.
Sync Reference: Select the synchronizing reference of DPCCH or Manual.
Transmit Diversity: Select Off, Antenna1 or Antenna2.
Transmit Diversity Type: Select between STTD On or STTD Off.
Active Channel Mode Selection: Select between compressed or normal mode.
Base Station/User Equipment: Uplink or Downlink.
Figure 4-21. WCDMA Setup Dialog
MS278XB OM |
