Menu Archive | Front Panel Menus |
Table | |
|
|
Modulation | When in the WCDMA measurement mode with the Random Access Channel graph type |
Measurements | selected, the following marker selections are available (Refer to the WCDMA Graph |
| Type Dialog on page |
| Measured Preamble: The measured preamble is fixed in this mode. |
| On/Off and Delta Markers are not available in this mode. |
| Preamble#: Set the Preamble# by pressing in the Preamble# parameter field and |
| entering a value using the numeric keys. When a new value is entered, the terminator |
| |
| be used to increment the marker value. |
| The marker’s value is displayed in the field below Preamble# and on the graticule |
| display. |
| All Markers Off: Disabled in this mode. |
Modulation | When in the or WCDMA measurement mode with the Random Access Channel with |
Measurements | Zoom or Transmit Power Control with Zoom graph type, the following marker selections |
| are available (Refer to the WCDMA Graph Type Dialog on page |
| setting graph types): |
| Active Marker: To select the active marker, press on the Active Marker field and select a |
| marker from the |
| To turn the active marker on or off, press the Off/On button. |
| Delta Markers are not available. |
| Marker n(µs): Set the active marker’s time by pressing in the Marker n(µs) parameter |
| field (where n is the active marker’s number) and entering a value using the numeric |
| keys. When a new value is entered, the terminator |
| Cancel. The rotary knob or Up/down arrow keys may also be used to increment the |
| marker value. |
| The marker’s value is displayed in the field below Marker n(µs) and on the graticule |
| display. |
| All Markers Off: Press the All Markers Off button to deactivate all of the markers. |
| TPC/RACH Zoom Edge: Press the Leading/Trailing toggle button to select between the |
| leading or trailing edge. This button is only available when Both Edges are selected. |
MS278XB OM |
