Measurements | Measurement Examples |
Measuring Harmonics
The following example shows a basic measurement of the second and third harmonic of a + 10 dBm, 1 GHz carrier using delta markers:
1.Preset the analyzer using the Preset button.
2.On the analyzer, set up the following: Center Frequency: 2 GHz
Span: 3 GHz
Reference Level: 10 dBm
RBW: 30 kHz
3.Turn on Marker 1 and press the
4.Turn on Marker 2, set it as a Delta Marker, then press the Next Peak icon until the marker lands on the second harmonic.
5.Turn on Marker 3, set it as a Delta Marker, then press the Next Peak icon until the marker lands on the third harmonic.
The display should look like the one in the figure below:
Figure 5-2. Measuring Harmonics
MS278XB OM |
