Anritsu Series MS278XB operation manual Menu Archive Front Panel Menus Measurement Menu, Spectrum

Menu Archive Front Panel Menus

Measurement Menu

The Measurement menu gives you access to setup various measurement types, such as Spectrum, RF, and a variety of modulation measurements.

Table 4-13.Measurement Menu

Spectrum	Spectrum Measurement Type: To change the measurement type, press on the
	Measurement Type button and select one of the following measurement types from the
Measurement Type	fly-out menu:
	Spectrum: Selects the spectrum analysis mode (frequency domain)
	RF: Selects the RF measurement mode (see below)
	QAM/PSK: Selects the modulation measurement mode (see below)
	WCDMA: Selects the modulation measurement mode (see below)
	WiMAX: Launches the WiMAX Analysis application (requires Options 22 and 41)
	Phase Noise: Launches the Phase Noise Measurement application (requires
	Option 52)
	Standard: This selection allows you to select a measurement standard that
	automatically configures all of the measurement parameters. To select a measurement
	standard, press on the Standard button and select the desired standard from the fly-out
	menu.
	RF Measurement Type: To change the measurement type, press on the Measurement
	Type button and select one of the following measurement types from the fly-out menu:
	Spectrum: Selects the spectrum analysis mode (see above)
	RF: Selects the RF measurement mode
	QAM/PSK: Selects the modulation measurement mode (see below)
	WCDMA: Selects the modulation measurement mode (see below)
RF Measurement Type	WiMAX: Launches the WiMAX Analysis application (requires Options 22 and 41)
	Phase Noise: Launches the Phase Noise Measurement application (requires
	Option 52)
	Standard: This selection allows you to select a measurement standard that
	automatically configures all of the measurement parameters. To select a measurement
	standard, press on the Standard button and select the desired standard from the fly-out
	menu.
	RF Measurement Types:
	OBW: Measures the occupied bandwidth of the signal
	TOI: Measures the third order intercept of the signal
	Channel Power: Measures the channel power of the signal
	ACP: Measures the adjacent channel power of the signal
	Multicarrier Channel Power: Measures the channel power of up to 12 carriers
	along with the adjacent and two alternate channel powers.
	CCDF: Displays the Complementary Cumulative Distribution Function (CCDF)
	curves and summary detail.
	Spectrum Masks: Displays the spectrum mask lines and verifies spectral
	compliance in a summary.
	Setup: Opens the RF Parameters Setup dialogs listed below:
	Occupied Bandwidth Setup Dialog on page 4-36
	Channel Power Setup Dialog on page 4-37
	Adjacent Channel Power (ACP) Setup Dialog on page 4-38
	Multicarrier Channel Power Setup Dialog on page 4-40
	CCDF Setup Dialog on page 4-43
	Spectrum Mask Setup Dialog on page 4-44

4-20 MS278XB OM